Preventive Measures in Electricity Shock

Published: 23rd February 2011
Views: N/A

The main hazards associated with electricity are fire and electrical shock. Electrical shock appears when the body becomes portion of the electric circuit, either when everyone comes in contact with the wires of an electrical circuit, two wires of an energized circuit and the ground, or a metallic portion that has become energized by connecting with an electrical conductor.



The effects and severity of an electrical shock rely on a number of considerations, such as the pathway by the way of the body, the quantity of current, the time length of the exposure, and whether the skin is dry or wet. Water is a good conductor of electricity, supporting current to flow more freely in wet conditions and by the way of wet skin. The result of the shock may categorize from a slight tingle to severe cardiac arrest.



Electrical Hazard Preventions



There are many ways of protecting individual from the hazards provoke by electricity, including guarding, grounding, insulation, and electrical devices. Workers can importantly reduce electrical hazards by following some precautions:

Check the wiring equipment every time you use. Replace Frayed electrical or damaged cords immediately.

Use safe work practices each time electrical supplies is used.

Remember the location and how to perform shut-off switches or circuit breaker panels. Operate these devices to turn off equipment in case of fire or electrocution.

Limit the usage of extension cords. Use only for limited operations. In all other cases, request set-up of a new electrical outlet.

Use multi-plug adapters with fuses or circuit breakers.

Minimize the potential for chemical spills or water on a near electrical supplies.

Safe Work Practices

The following work practices may lessen risk of injury or fire when working with electrical accessories or equipments:

Avoid touching with energized electrical circuits.

Detach the power source before repairing or servicing electrical equipment.

If it is important to handle equipment that has electrical circuits connections, be certain that the hands are dry and, if possible, wear nonconductive gloves and shoes with protective soles.

If it is unsafe to do so, work with one hand, keeping the other hand in your pocket or at your side, away from conductive material. This precaution lessens the likelihood of accidents that effect in current passing via the chest cavity.

Reduce the use of electrical equipment in a cold room or other areas where condensation is similar. If accessories must be used in certain areas, mount the equipment on vertical panel or on a wall.

If a chemical or water is spilled onto equipments, shut off power at the circuit breaker or main switch and unplug the outlet.

If any person comes in contact with a live conductor, never touch the cord or equipment, person. Disconnect the power source immediately from the circuit breaker or pull out the plug through a leather belt.

Be safe when it comes to electricity. If we follow these procedures it is considered very effective. Visit our website to know more about safety tips in electricity http://currentcost.net/. We will share our ideas safety installations.






Report this article Ask About This Article


Loading...
More to Explore